Fleet maintenance by mileage and engine hours Maintenance based on real use, not the calendar
Fleet maintenance based on real use: each vehicle or machine tells you when its service is due, by odometer or by hour meter, depending on how it works.
Upcoming services
- Truck 12 in 1,200 km
- Truck 08 Soon in 350 km
- Excavator 02 in 85 engine hours
- Forklift 07 Soon in 12 engine hours
Mileage-based fleet maintenance schedules each service according to what the unit actually drove, not a date on the calendar. Telemetrics Data does it with the GPS odometer or with the hour meter, depending on how each vehicle or machine works, with an alert before every service. Kilometers come from your fleet’s GPS tracking; if you rent out equipment, rental equipment hour tracking lets you service it between one contract and the next, and forklift telematics covers those machines in particular.
What you gain with usage-based maintenance
-
More time in operation
Fewer units stopped by unexpected breakdowns, because the service comes before the failure.
-
Services at the right moment
Neither too early, paying for services that weren’t needed, nor too late, putting the equipment at risk.
-
Clear costs per unit
Know how much it costs to maintain each truck and each machine, with data instead of estimates.
Preventive maintenance by mileage and engine hours
By odometer (kilometers)
For units that wear according to the distance they travel: trucks, light vehicles and freight transport.
-
Services by kilometers driven
Each unit has its service plan based on the real mileage recorded by the GPS.
-
Alert before each service’s mileage
The platform alerts you in advance, so you can schedule the workshop without stopping the operation.
By hour meter (engine hours)
For any machine or equipment that works with the engine running: excavators, forklifts, compactors, generators and more.
-
Services by engine hours (hour meter)
Excavators, backhoes, forklifts and other equipment are serviced according to the hours they actually worked.
-
Alert before each service’s hours are reached
We alert you in time to schedule the service between shifts or between one rental and the next.
A single fleet can combine both measures, and a single unit can have some services by kilometers and others by hours.
For both
-
Maintenance history per unit
All of each unit’s services in one place: what was done, when and at what reading.
-
Cost control per unit
Record the cost of each service and compare how much it costs to maintain each unit.
What we measure
- Kilometers (odometer)
- Engine hours (hour meter)
- Vibration
- Other variables depending on the equipment
Fleets and heavy machinery already working this way
- Transport and distribution fleets
- Construction companies
- Companies with any type of machinery, owned or rented
How it works
Moving from the calendar to real use doesn’t mean keeping more records, just different ones. Here is how it works, from installation in each unit to the alert that lets you schedule the workshop in time.
-
We install the device in each unit
Our technical team installs the device, which records kilometers by GPS, engine hours or both, depending on how each unit works.
-
We load your maintenance plan
Each unit’s service plan is loaded into the platform, by kilometers or by engine hours, and the reading updates with real use.
-
You get the alert in time
The alert arrives before each service, and every completed service is saved in the unit’s history with its cost.
Frequently asked questions about usage-based maintenance
Why schedule maintenance by kilometers instead of by calendar?
Because two trucks don’t wear out the same way in the same month: one may drive much more than the other. When you schedule by kilometers, each vehicle gets its service according to real use, neither too early, paying for services that weren’t needed, nor too late, putting the equipment at risk. The GPS odometer records kilometers without relying on handwritten notes.
How are machinery engine hours counted?
The device works as an hour meter: it records each machine’s engine hours and sends them to the platform, where they are compared against your maintenance plan. It applies to any machine or equipment with an hour meter, such as excavators, backhoes, forklifts, compactors or generators. The same unit can have some services by kilometers and others by hours.
How far in advance does the platform alert me?
You decide. For each maintenance plan you set how many kilometers or engine hours in advance you want the alert, based on how long it takes to schedule the workshop.
Can I record the cost of each service?
Yes. Every service is saved in the unit’s history with what was done, when, at what reading and how much it cost. With that information you compare how much it costs to maintain each truck and each machine, with data instead of estimates, and decide more clearly when to repair or replace.
Does it work for trucks and machinery at the same time?
Yes. On the same platform, each unit follows its plan by kilometers, by engine hours or both, depending on how it works. You see the upcoming services for all your units in one place, with the history and costs of each, without keeping separate records for each type of equipment.
Works well with
-
Fleet tracking
Every vehicle, every route, on one screen.
Learn more about fleet tracking -
Equipment rental
Every hour your equipment worked, billed without dispute.
Learn more about equipment rental -
Guide
Maintenance by mileage or engine hours: which is right for your fleet
By odometer or by hour meter, depending on each unit: how to schedule services based on real use.
Read the guide: Maintenance by mileage or engine hours: which is right for your fleet
Transform your operation and take control
We’ll show you the platform working on a case like yours. No commitment.
- WhatsApp+506 6219-0029
- Phone+506 4001-1642
- Emailinfo@td-cr.com
- HoursMonday to Friday, 8 a.m. to 5 p.m. (Costa Rica time)
- LocationSan José, Costa Rica
- CoverageCosta Rica and Central America