Skip to content

Guide · Maintenance Maintenance by mileage or engine hours: which is right for your fleet

Published on · Telemetrics Data

Preventive maintenance by mileage or engine hours schedules each service according to how much the unit actually worked, not the date on the calendar. In this guide we explain when it makes sense to measure in kilometers, when in engine hours, and how to build a maintenance plan for each vehicle or machine.

What usage-based maintenance is

With calendar-based maintenance, each unit goes to the workshop every so many months, no matter how much it worked. With usage-based maintenance, the service comes when the unit has built up a certain amount of work: kilometers, if it is measured with the odometer, or engine hours, if it is measured with the hour meter.

Think of two trucks of the same model. One runs long routes every day; the other makes deliveries in the city and covers far less distance. With the same calendar interval, the first one is late for its service and the second one arrives before it needs it. With usage-based maintenance, each one goes to the workshop when it really needs to.

Odometer or hour meter: depending on how each unit works

What determines the measure is how each vehicle or machine wears, not what type it is.

  • By odometer (kilometers): best for units whose wear depends on the distance they travel, such as delivery trucks, light vehicles and freight transport.
  • By hour meter (engine hours): best for units that work with the engine running without covering much distance, such as excavators, backhoes, forklifts, compactors, generators or any equipment that spends the day in one place. Hours when the engine idles without working also count, and that is exactly what a calendar can’t see.

A single fleet can combine both measures, and a single unit can have some services by kilometers and others by hours. For example, a truck with equipment that works while parked, such as a crane or a mixer, can have the vehicle’s maintenance tracked by kilometers and the equipment’s by hours.

Advantages over the calendar

  • Services at the right moment: neither too early, paying for oil and filters that were still good, nor too late, putting the equipment at risk.
  • Fewer unexpected stops: the service comes before the failure.
  • A planned workshop: if you know how many kilometers or hours each unit has left, you can coordinate the workshop without stopping the operation.
  • Comparable costs: by recording each service with its reading, you can compare how much it costs to maintain each unit.
  • An organized history: each service is recorded with date, reading and what was done, which is useful with the manufacturer, an insurer or when selling the unit.

So is the calendar no longer useful?

It is useful, as a limit. Many manufacturers state their intervals with a “whichever comes first” rule: a certain number of kilometers or hours, or a certain amount of time. Some components, such as fluids, batteries or rubber parts, age even if the unit works very little.

The recommended practice is to use real usage as the main trigger and keep the time limit from the manual as a cap. Always follow the intervals specified by the manufacturer of each unit.

Would you like each unit to tell you on its own when its service is due? Telemetrics Data fleet maintenance schedules services by kilometers and engine hours, and alerts you in advance.

Explore fleet maintenance

How to build a maintenance plan for each unit

  1. Take an inventory of your units: type, make, model, whether it is measured by odometer, by hour meter or both, and the current reading.
  2. Write down the manufacturer’s intervals: for each service (oil change, filters, brakes, tires, general inspection), in kilometers or hours and with its time limit.
  3. Automate the readings: let the GPS record kilometers and the hour meter record hours, without depending on handwritten notes.
  4. Set an alert margin: how many kilometers or hours in advance you want to know, based on how long it takes to coordinate the workshop.
  5. Record every service: what was done, when, at what reading and how much it cost.
  6. Review the plan every month: which units cost more, which failures repeat and whether any interval needs adjusting.

How to measure the maintenance cost per unit

Add up what you spent on services and repairs for one unit over a period and divide it by the kilometers it traveled or the hours it worked in that same period, depending on how it is measured. The result is your maintenance cost per kilometer or per hour.

That number lets you compare similar units with each other. If one costs much more than the others for the same work, it’s worth checking what is happening with it, or considering whether it’s time to replace it.

Common mistakes

  • Relying on the driver to write down the odometer: handwritten readings get forgotten or arrive late.
  • Using the same interval and the same measure for the whole fleet: different units doing different work wear differently.
  • Not recording costs: without that data there is no way to know which unit is worth keeping and which to replace.
  • Forgetting the manufacturer’s time limit: a unit that works little still needs service.

Checklist to get started

  • Inventory of units with their current reading
  • Manufacturer intervals for each service, in kilometers or hours
  • Automatic odometer and hour meter readings
  • Alert margin defined
  • Record of each service with its cost
  • Monthly plan review

Related

Transform your operation and take control

We’ll show you the platform working on a case like yours. No commitment.