Skip to content

Guide · Equipment rental How to bill equipment rentals by usage hours

Published on · Telemetrics Data

Billing rented equipment by usage hours is the most direct way to charge for a rental: the customer pays for what the equipment worked. It sounds simple, but between the contract, the hour log and the invoice there are several steps where an hour can get lost or turn into a dispute. This guide walks through each one and helps you decide how to organize billing for your equipment, whether you rent out excavators, backhoes, forklifts or other machinery.

If you want to see how it’s done with data from the equipment itself, take a look at Telemetrics Data rental equipment hour tracking and billing.

Why hours get lost when billing by hand

When hours are written on a slip, phoned in or added up at the end of the month, billing depends on the memory and goodwill of several people. Nobody has to act in bad faith for hours to get lost: all it takes is a shift that ran long and wasn’t written down, a slip that arrived late or a machine that worked on a Saturday without anyone reporting it.

There is also a less visible cost: the time your administrative team spends gathering slips, checking numbers and clearing up differences with the customer. That time doesn’t appear on the invoice, but you pay for it anyway.

The most common sources of differences are:

  • Handwritten records, with unclear writing or incomplete data.
  • Hours rounded differently depending on who writes them down.
  • Use outside the agreed hours that isn’t recorded.
  • Slips that get lost or arrive days after the job is done.
  • Differences between what the operator, the site manager and the customer remember.

Contracted hours vs. worked hours

Before talking about tools, it helps to be clear about what is being billed. Contracted hours and worked hours are not the same thing.

Contracted hours are the ones agreed in the contract: the schedule during which the equipment is available to the customer, or the minimum number of hours the customer commits to paying. Worked hours are the ones the equipment actually operated, and they are measured with the hour meter, which counts engine hours.

The two may or may not match. A machine can be contracted Monday to Friday during business hours and work less because the site stopped, or work more because the customer used it after hours. That’s why the contract should make clear:

  • Whether billing is per hour worked, per day or for a minimum number of hours.
  • What the contracted hours are for each piece of equipment.
  • What happens with hours outside that schedule: whether they are billed at another rate, require authorization or are not allowed.
  • Which record will be used as the basis for billing.

That last point is the one that prevents the most disputes. If both sides agree from the start that the hour meter record is the basis for billing, the end-of-month conversation stops being about who is right and becomes about what the data says.

Would you like to see how your own equipment’s hours are recorded and turned into charges?

Request a demo

How a GPS hour meter works

A traditional hour meter is a counter on the machine’s dashboard: someone has to go read it, write it down and send it. A GPS hour meter does the same, but the data reaches a platform on its own, without depending on anyone reading it.

With Telemetrics Data, the process is:

  1. Our technical team installs the device on each machine, with minimal downtime.
  2. The device records the engine hours and location of the equipment and sends them to the platform.
  3. On the platform, each machine is linked to its customer and its contract, with its schedule and its rate.
  4. Recorded hours become a charge at that customer’s rate, by the hour or by the day.
  5. If equipment works outside the contracted hours, you get an alert.

The customer sees the same data you do: hours, days and times of use for each piece of equipment they have rented. And since the platform also shows location, you know where each machine is from the moment it leaves your yard until it comes back.

The same hours serve another purpose: scheduling engine-hour maintenance between one rental and the next, so each machine goes out to its next contract with its service up to date.

Hourly or daily rate

There is no single right rate for every case. What matters is that each customer knows which one applies to them and that the usage record lets you calculate it without ambiguity.

When an hourly rate makes sense

An hourly rate works well when equipment use varies a lot from day to day: one-off jobs, sites with pauses or customers who need the machine only at certain times. The customer pays exactly for what they used and you bill every hour the equipment worked.

When a daily rate makes sense

A daily rate is easier for the customer to budget and is usually used when the equipment is assigned to a site for full shifts. Even so, recording the hours worked is still useful: it shows you whether the equipment is used outside the agreed hours and gives you the information for maintenance.

Different customers, different terms

Nothing stops you from using both approaches depending on the customer or the type of equipment. What makes billing complicated isn’t having several rates, it’s calculating them by hand. When each customer or contract has its rate loaded in the platform, the calculation is done automatically on the recorded hours.

How to avoid disputes with the customer

Most billing disputes aren’t about price, they’re about hours. These practices help billing become a confirmation rather than a negotiation:

  • Agree on the rule before you start. Billing unit, contracted hours and how extra hours are handled, in writing in the contract.
  • Use a single record. Make the hour meter record the basis for billing, not the sum of slips from different people.
  • Share the data during the rental. If the customer can see their equipment’s hours while it works, there are no surprises at the end of the period.
  • Flag after-hours use promptly. It’s easier to talk about it the same day than when the invoice arrives.
  • Itemize every charge. Hours, days and rate applied on each line, so the customer can check it on their own.

When both sides look at the same record, the charge backs itself up. And if the customer questions a line, you have the usage detail that supports it.

Checklist to get started

If you want to move to billing real hours, this order helps you do it without interrupting your operation:

  1. List your rental equipment and the active customers and contracts for each one.
  2. Define for each contract the billing unit (hour or day), the contracted hours and what happens with hours outside that schedule.
  3. Review your contracts so they state which record will be used as the basis for billing.
  4. Install a GPS hour meter on each machine, starting with the ones rented most often.
  5. Load customers, contracts, schedules and rates into the platform.
  6. Give each customer access to their equipment’s data.
  7. Use the same hours to schedule maintenance between one rental and the next.

If you rent out forklifts, forklift telematics brings together what you need for those machines in one place: usage hours, location, automatic billing and engine-hour maintenance.

We’ll show you the platform working on a case like yours. No commitment.

Book a demo

Related

Transform your operation and take control

We’ll show you the platform working on a case like yours. No commitment.